home *** CD-ROM | disk | FTP | other *** search
/ Collection of Tools & Utilities / Collection of Tools and Utilities.iso / bbsutil / ros403.zip / CHANGES.DOC < prev    next >
Text File  |  1991-03-31  |  10KB  |  227 lines

  1. This file documents changes, additions, and corrections to ROS 4.0 and its
  2. associated documentation.  Also, please refer to EXTERNAL.DOC for additional
  3. documentation.
  4.  
  5. ┌─────────────────────────────┐
  6. │ ROS 4.01  December 19, 1990 │
  7. └─────────────────────────────┘
  8.  
  9. 1. Early releases of the "System Operator's Guide to ROS" incorrectly stated
  10. on page 1 that "DOS version 3.0 or later is required."  The statement should
  11. have been "DOS version 3.3 or later is required."
  12.  
  13. 2. SAMPLE.DAT contains sample setups for several archive programs, file
  14. transfer protocols, and doors.  These setups should be modified for your
  15. particular application and installed using ROSSETUP.
  16.  
  17. 3. The ROSSETUP.EXE program was not properly handling additions/deletions to
  18. the control file.  This has been corrected.
  19.  
  20. 4. ROS uses several external programs to handle the serial port, perform
  21. file transfers, process compressed files (archives), and manage the doors:
  22. The following list are programs that ROS has been tested with and been found
  23. to be compatible.  This list is in no way an endorsement of any particular
  24. product.  All of these files are available from The Albuquerque ROS at (505)
  25. 299-5974 or from hundreds of other online services and bulletin board
  26. systems.
  27.  
  28.   FOSSIL drivers:
  29.  
  30.     BNU170.ZIP
  31.     X00V122.ZIP
  32.  
  33.   Transfer protocol drivers:
  34.  
  35.     Protocol      Recommended Program
  36.     --------      -------------------
  37.     Clink         CLINK120.ZIP
  38.     HyperP        HYPERP.ZIP
  39.     Jmodem        JMOD121.ZIP
  40.     Kermit        PCKERM21.ZIP
  41.     Lynx          LYNX302.ZIP
  42.     Mlink         MLINK16.ZIP
  43.     Puma & MPT    MPT110.ZIP
  44.     Super8k       SK445.ZIP
  45.     Wxmodem       SK445.ZIP
  46.     Xmodem        DSZ.ZIP
  47.     Xmodem-1k     DSZ.ZIP
  48.     Ymodem        DSZ.ZIP
  49.     Ymodem-G      DSZ.ZIP
  50.     Zmodem        DSZ.ZIP
  51.  
  52.   File compression utilities:
  53.  
  54.     Type          Recommended Program
  55.     ------        -------------------
  56.     .ZIP          PKZ110.EXE
  57.     .ARC          PK361.EXE
  58.     .LZH          LH113C.EXE
  59.     .PAK          PAK250.EXE
  60.     .ZOO          ZOO201.EXE
  61.     .LBR          LUE22.ZIP
  62.  
  63.   Doors:
  64.  
  65.     Just about any door that uses DORINFOx.DEF or DOOR.SYS since ROS creates
  66.     both of these files.  This includes most doors that are compatible with
  67.     RBBS-PC, QBBS, and many other bulletin board systems.
  68.  
  69. 5. The following table defines the user flags as they will be shown on the
  70. Sysop <U>ser <E>dit screen.  "1" indicates the flag is set:
  71.  
  72.      Bit Position      Name         Keys to change from Setup Menu
  73.    0000000000000000
  74.    |          |||||- Shiftlock      <S>hiftlock
  75.    |          ||||-- Ansi           <A>nsi
  76.    |          |||--- Expert         <X>pert (from Files or Messages menu for
  77.    |          ||                            regular users or from Sysop Menu
  78.    |          ||                            for sysop)
  79.    |          ||---- Brief          <B>rief
  80.    |          |----- File size      <F>ilesize
  81.    |---------------- Expiring message has been sent (internal use)
  82.  
  83. ┌─────────────────────────┐
  84. │ ROS 4.02  March 2, 1991 │
  85. └─────────────────────────┘
  86.  
  87. 1. The user is now given the option of performing an automatic logout after
  88. a file transfer completes.  A ten second timer is displayed after the
  89. transfer before the logout actually takes place.  The user can interrupt
  90. this timer with an "H" to hangup immediately or any other key to remain
  91. online.
  92.  
  93. 2. Minor changes were made to the format of the information displayed before
  94. a file transfer starts.
  95.  
  96. 3. The registration procedure in an open system is considerably "friendlier"
  97. now since the user can make changes to the registration information before
  98. its filed away.  In conjuntion with this change, two screens displayed to
  99. new users have changed names and two screens have been added.  NEWINFO has
  100. been changed to REGINFO1 and REGISTER has been changed to REGINFO4. REGINFO2
  101. and REGINFO3 have been added.  The screens are displayed at the following
  102. times:
  103.  
  104.   REGINFO1     The first time a user calls
  105.   REGINFO2     Each subsequent time a user that hasn't registered calls
  106.   REGINFO3     When the system detects missing registation information
  107.   REGINFO4     When the user has successfully complete the registation
  108.  
  109. Short sample sceens are included in DISPLAY.ZIP.
  110.  
  111. 4. The ANSI and lower case settings for an unregistered user are now
  112. correctly maintained from call to call.
  113.  
  114. 5. Memory requirements for ROS have been reduced by over 40 k-bytes.  Many
  115. doors that formerly required "SWAP" to be on can now be run with it off for
  116. faster loading and unloading.
  117.  
  118. 6. ROS now ensures that DOS version 3.3 or later is being used.
  119.  
  120. 7. ROS now reads the transfer log file instead of the display screen to
  121. determine the characters per second for the transfer.  If you're using DSZ,
  122. use the environment variable "DSZLOG" to set the file name and use a
  123. different file for each node, e.g. node one might use "SET
  124. DSZLOG=DSZ-1.LOG".  Note that as of this writing, MPt (formerly Puma) and
  125. Super8k will both write to the DSZ log file in a compatible format.  These
  126. drivers can also create a seperate log file for each node.
  127.  
  128. 8. The default lines-per-page for new users has been changed from 23 to 24
  129. lines.
  130.  
  131. 9. When adding new users from the <S>ysop <U>ser screen, the default color
  132. was being set to green on black instead of the color set in ROSSETUP.  The
  133. color for new users added to the system through the normal login/register
  134. sequence was being set correctly.
  135.  
  136. 10. The <S>ysop <U>ser screen no longer erases the right column as changes
  137. are made to fields in the left column.  ^K (erase to end-of-line) when
  138. entered locally, will still do so however.
  139.  
  140. 11. When Extended Display Codes (EDC) 004, 005, or 006 are used, blank lines
  141. will no longer be exanded into the field width but will instead be sent to
  142. the remote system as just a CR/LF pair.
  143.  
  144. 12. In the "Control" screens of ROSSETUP, F3 now wraps around to the last
  145. record in a set if there is no previous record.  F4 still wraps around to
  146. the first record if there is no next record.
  147.  
  148. 13. After <L>oading a message, ROS is now left in edit mode instead of
  149. automatically saving the message.
  150.  
  151. 14. The colon (":") after the line number on messages has been eliminated to
  152. allow the full message line to properly display.  Previously, a long (76
  153. character) line caused an extra blank line to appear.
  154.  
  155. 15. The editor now consistently renumbers lines after every insertion or
  156. deletion.  Previously, lines were renumbered only after an insertion and
  157. deleted lines were left as apparent "holes" until the message (or macro) was
  158. stored away.
  159.  
  160. 16. A memory allocation bug in the editor was corrected.
  161.  
  162. 17. A flag is now set when the sysop <V>alidates a user.  This flag, the
  163. second bit from the left in the "Flags" field, can be tested and reset by
  164. external programs to create lists of newly validated users.
  165.  
  166. 18. Corrected several display problems in ROSSETUP.
  167.  
  168. 19. Corrected a bug in the catalog editor.  <S>electing a new file name
  169. would not work correctly until an area had been selected by <A>rea change,
  170. <F>orward, or <B>ackward.
  171.  
  172. 20. The name of the file DISPLAY.ZIP has been changed to ROS-SYSM.ZIP to
  173. better indicate its use.
  174.  
  175. *21. Message and file areas can now be set to "free" in ROSSETUP.  When a
  176. free message area is entered, ROS will display the message "Time accounting
  177. suspended" and allow the user to spend as much time as desired in this area.
  178. When a user tries to download a file from an area marked as free, ROS will
  179. allow the transfer even if the user does not have sufficient time remaining
  180. and will display the message "Time accounting suspended" before the transfer
  181. starts and "Time accounting resumed" after the transfer ends, much like it
  182. does for uploads.
  183.  
  184. *22. Message areas, file areas, and doors can now be controlled by age.
  185. ROSSETUP allows the sysop to enter a lower and upper age limit.  If the user
  186. is younger than the lower limit or older than the upper limit for an area or
  187. door, no access will be allowed.  By default, new entries will be created
  188. with 0 for the